Stricken Sie sich warm: Anleitung für Stulpen Handschuhe stricken - Chiemseegarn

Knit yourself warm: Instructions for knitting cuffs and gloves

March 27, 2024

Knitting Cuffs Gloves: A Warm-Up Guide

Knitting mittens is not only a fun craft, but also a practical way to keep warm. In this section, we will take a closer look at why knitting mittens is so popular and how to choose the right wool and needles .

Why knit cuff gloves?

Gauntlet gloves are a great alternative to traditional gloves. They cover the hands up to the wrist and keep them warm while leaving the fingers free. This allows for better mobility and dexterity when wearing the gloves.

In addition, knitting mittens offers the opportunity to express your creativity and create a personalized accessory. You can use different patterns, colors and embellishments to personalize your mittens and make them unique.

Choosing the right wool and needles

Choosing the right wool and needles is crucial to knitting high quality mittens. Here are some important points to keep in mind:

Wool : Choose a wool that is both soft and warm. Merino wool or alpaca wool are popular options for mittens as they are comfortable to wear and provide good insulation. Be sure to choose a wool that is not too coarse or scratchy to ensure comfort.
Needles : Choosing the right needles depends on the knitting technique you want to use and the thickness of the wool. Use thinner needles for finer wool and thicker needles for thicker wool. Circular knitting needles or double pointed needles are ideal for circular knitting of mittens and gloves.

It is important that you choose the right yarn thickness (yardage) and needle size for your project. The following table provides a general guide to choosing the right needle size based on the yarn thickness:

wool thickness	needle size (mm)
Superfine (Fingering)	2.0 - 3.5
Fine (Sport)	3.5 - 4.5
Medium (DK)	4.5 - 5.5
Dick (Aran)	5.5 - 6.5
Very thick (bulky)	6.5 - 9

By choosing the right wool and needles, you lay the foundation for a successful mitten knitting project. Make sure the wool and needles are a good match to achieve an even stitch pattern and the desired fit.

Basic knitting techniques

Before you start knitting mittens, it's important to master basic knitting techniques. In this section, we'll cover cast-on and gauge, as well as knitting in the round and decreasing and increasing.

cast-on and gauge

Casting on is the first step in knitting cuff gloves. This is where the first stitches are cast on the knitting needle. The number of stitches you cast on determines the width of the cuff glove.

To achieve an even cast-on, it is advisable to do a gauge swatch. This involves knitting a small sample to ensure you are using the correct needle size and tension. The gauge swatch will also give you an idea of how many stitches and rows you will need to achieve the desired size.

needle size	gauge (10 cm)
3 mm	26 stitches x 36 rows
4 mm	22 stitches x 30 rows
5 mm	18 stitches x 24 rows

It is important to achieve the gauge specified to ensure your cuff gloves have the correct fit. If your gauge is too tight, you should use a larger needle size. If it is too loose, you should choose a smaller needle size.

Knitting in rounds and decreasing and increasing

To knit the cuff gloves seamlessly, work in rounds. You knit continuously in circles without turning the work. This creates an even knitting pattern and gives the gloves a professional look.

When knitting in the round, there is also the option of making decreases and increases to adjust the shape of the gloves. Decreases reduce the number of stitches per round, while increases increase the number of stitches. This allows the gloves to be made tighter or looser in different places to achieve a better fit.

There are different decrease and increase techniques such as simple decrease (knitting two stitches together) or increase by knitting a cross thread between two stitches. The exact technique depends on your knitting pattern and your preference.

By familiarizing yourself with these basic knitting techniques, you will be well equipped to move on to the step-by-step instructions on how to knit cuff gloves. Don't forget to check your gauge and use the correct needle size for your desired size. With a little practice, you will soon be knitting your own wonderful cuff gloves.

Step-by-step instructions for knitting cuff gloves

When it comes to knitting cuff gloves, a detailed tutorial is helpful to complete the project successfully. Follow the steps below to knit your own cuff gloves.

knitting cuffs

Step: Cast on stitches.

Use the desired number of stitches to knit the cuff of your mittens. This can vary depending on the desired width. A common number is between 20 and 30 stitches.

Step: Knit the cuff pattern.

Choose a cuff pattern of your choice, such as the classic 1x1 rib pattern (alternately knit one stitch and purl one stitch) or the 2x2 rib pattern (alternately knit two stitches and purl two stitches).
Knit the cuff pattern for the desired length. Usually the cuff length is about 5-7 cm.

knitting the handpiece

Step: Change to the stocking stitch pattern.

After the cuff is finished, switch to the stocking stitch pattern by knitting all stitches.
Continue knitting in rounds until the desired length of the handpiece is reached. This will depend on the desired coverage and may vary.

Step: decreases and increases.

If you want a narrower fit for your cuff gloves, you can make decreases by knitting stitches together at regular intervals. This will create a tighter fit around the wrist.
If you prefer a looser fit, you can make increases by increasing one stitch at regular intervals. This allows more freedom of movement for the fingers.

add a thumb hole

Step: Placement of the thumb hole.

Decide where you want to place the thumb hole in your gauntlet glove. Typically, the thumb hole is placed on the side of the hand, about 2-3 cm below the knuckles.

Step: Put stitches aside for the thumb hole.

Knit to the point where you want the thumb hole to begin.
Pick up the desired number of stitches for the thumb hole and place them on a stitch holder.

Step: Continue knitting in rounds.

Continue knitting in rounds over the remaining stitches of the handpiece until you reach the desired length.

Step: Re-cast the stitches for the thumb hole.

Take the stitches for the thumb hole from the auxiliary thread back onto the knitting needle.
Continue knitting these stitches in the next rounds to complete the thumb hole.

With these steps, you can successfully knit your own cuff gloves. Adapt the instructions as you like to customize the size and design of your gloves. Have fun knitting and wearing your homemade cuff gloves!

refinement and individualization

After knitting your cuff gloves, you can personalize them with various embellishments to suit your individual preferences. Here are some ways you can embellish your cuff gloves, as well as tips for adjusting the size.

decoration options

Embellishments can give your gauntlet gloves a personalized and unique touch. Here are some embellishment ideas:

Knitting patterns: Experiment with different knitting patterns, such as cable knit, lace knit or Fair Isle knit, to make your mittens more interesting.
Appliqués: Add small knitted or crocheted appliqués such as flowers, hearts or animals to add a playful accent.
Beads or sequins: Use beads or sequins to make your cuff gloves sparkle. Sew them along the cuff or along the hand part for a touch of elegance.
Color change: Experiment with different colors and create stripes or gradients to give your gauntlet gloves a lively and dynamic look.

size adjustment

It is important that your gauntlet gloves fit well to provide you with maximum comfort and warmth. Here are some tips for adjusting the size:

Gauge: Make sure you do a gauge swatch to determine the correct number of stitches per centimeter. Adjust the needle size to achieve the desired size.
Finger length: If you want to adjust the length of the finger area, knit either more or fewer rows depending on whether you have longer or shorter fingers.
Wrist width: If your wrists are wider or narrower, you can adjust the number of stitches in the cuff area to achieve the desired width.

Here is a table with approximate measurements for different glove sizes to give you a guide:

Size	wrist circumference (cm)	hand length (cm)
S	15-17	16-18
M	17-19	18-20
L	19-21	20-22

Remember that these are guidelines only and your individual measurements may vary. Adjust the instructions accordingly to achieve the perfect fit for your gauntlet gloves.

By adding embellishments and adjusting the size of your cuff gloves, you can knit a unique pair that reflects your personal style and needs. Let your creativity flow and enjoy wearing your handmade cuff gloves.

Tips for successful knitting of cuff gloves

When knitting mittens, there are some important tips to keep in mind to ensure successful results. Here are some helpful recommendations to make your knitting project a success.

Mastering important knitting techniques

To successfully knit cuff gloves, it is important to master some basic knitting techniques. These include casting on, knitting in the round, and decreasing and increasing. A solid understanding of these techniques makes knitting easier and ensures a consistent and professional end result.

knitting technique	Description
cast-on	The first step in knitting to create a row of stitches on the needle.
circular knitting	Knitting in the round to create seamless cuff gloves.
decreases and increases	Techniques for adding or removing stitches to adjust the shape of the gloves.

Attention to the right fit

Another important aspect of knitting cuff gloves is paying attention to the right fit. You should adjust the size and length of the gloves to suit your individual needs, taking into account the stretchability of the yarn you are using and the fit you are looking for. Measure your hand carefully to find the perfect size and adjust the number of stitches accordingly.

Troubleshooting and Help

Even experienced knitters make mistakes occasionally, so it's important to know how to fix them and find help. If you notice a mistake, such as a wrong stitch or pattern, you can either unravel and correct the affected areas or find an alternative solution to conceal the mistake. There are a variety of online resources, forums, and books that offer troubleshooting guides and help.

With these tips, you can improve your knitting skills and successfully knit cuff gloves. Master the basic knitting techniques, pay attention to the right fit, and be prepared to fix mistakes. With a little practice and patience, you will soon be able to knit your own beautiful cuff gloves.

You can find further articles on this topic here:

https://chiemseegarn.com/blogs/stricken/handschuh-stulpen-stricken

https://chiemseegarn.com/blogs/stricken/ajour-stulpen-stricken

https://chiemseegarn.com/blogs/stricken/handlenk-stulpen-stricken

https://chiemseegarn.com/blogs/stricken/stulpen-stricken-mit-2-nadeln

https://chiemseegarn.com/blogs/stricken/stulpen-mit-zopfmuster-stricken

https://chiemseegarn.com/blogs/stricken/stulpen-mit-daumenloch-stricken-anleitung

https://chiemseegarn.com/blogs/stricken/stulpen-mit-daumenloch-stricken

https://chiemseegarn.com/blogs/stricken/stulpen-fuer-arme-stricken

https://chiemseegarn.com/blogs/stricken/japanische-stulpen-stricken

https://chiemseegarn.com/blogs/stricken/stulpen-beine-stricken

https://chiemseegarn.com/blogs/stricken/stulpen-stricken-muster